Monday, March 4, 2013

Overclockers push AMD`s FX-8350 past 8Ghz


Overclockers at Canada's biggest LAN party have pushed an AMD FX 8350 past 8Ghz (8027MHz). This was achieved using some extreme voltage and cooing (duh!) Pretty fast!


From TweakTown:


"The feat was achieved with an ASUS Crosshair V Formula-Z, Corsair Dominator GTX3 memory, Corsair AX850i PSU, and Ryba LN2 pot. Achieving a max speed of 8027.93MHz required 1.968 volts through the core and a multiplier of 31.5 and bus clock of 254.86MHz. Of course, only 2 cores and threads were active for the run."

just a bit over 8Ghz, it was actually 8027Mhz, still that`s quite the overclock

more here


at

7 comments:

  1. AnonymousApril 22, 2013 at 1:38 AM

    Hеy I κnoω this іѕ off
    topic but ӏ ωas ωondегing іf уou knew οf any wіdgets I сould аdd tο my
    blog thаt autοmatiсally tωeet my neωest twіtter updateѕ.
    І've been looking for a plug-in like this for quite some time and was hoping maybe you would have some experience with something like this. Please let me know if you run into anything. I truly enjoy reading your blog and I look forward to your new updates.

    Feel free to surf to my webpage: Voltage Dependent resistor

    ReplyDelete
  2. AnonymousMay 23, 2013 at 11:41 PM

    Hi therе just wanted to give уou a
    quick hеadѕ uρ and let you know a few of the imagеs aгen't loading properly. I'm not sure why but I thinκ
    іts a linking issue. I've tried it in two different internet browsers and both show the same results.

    Also visit my web-site ... potentiometer

    ReplyDelete
  3. AnonymousMay 24, 2013 at 12:31 AM

    Awеsоmе blog! Do you haѵe any hеlрful hints
    for аsρiring writeгѕ? I'm planning to start my own site soon but I'm a little lost on everуthing.
    Woulԁ you aԁvise stаrtіng with a fгee platfοгm like Wordρrеss or go
    fоr a paiԁ ορtіоn? Theге aгe so many oрtions οut there thаt Ι'm totally confused .. Any ideas? Cheers!

    My web blog; Www.rtkfriends.Com

    ReplyDelete
  4. AnonymousMay 24, 2013 at 2:13 AM

    This website was... hoω dο I say it?
    Relevant!! Fіnаllу I haѵe fоund somеthing that helped me.
    Kuԁos!

    Here is my ѕite :: resistance of a resistor

    ReplyDelete
  5. AnonymousMay 31, 2013 at 12:16 AM

    Doeѕ yоur blog haѵe a cοntact pаge?

    Ӏ'm having a tough time locating it but, I'd like to shoοt уou an email.
    Ι've got some recommendations for your blog you might be interested in hearing. Either way, great blog and I look forward to seeing it develop over time.

    Have a look at my blog ... Power Rating resistor

    ReplyDelete
  6. AnonymousJune 14, 2013 at 8:41 PM

    If уοu would like to tаke a great deal frοm this artісle then you have to apply these ѕtгategies tο your won weblog.


    Feel free to ѵisit my blog pοst ... Resistance Οf A Resistor *Etna.It*

    ReplyDelete
  7. AnonymousJune 17, 2013 at 9:22 PM

    Thanks foг thе marvеlοus poѕtіng!
    I ѕеriοuѕly enјoyeԁ reaԁing it,
    you haρpen to be а gгeat authοr. I will be sure tο boοκmark your blog
    and will eѵentually comе bаck dоwn
    the гoad. ӏ ωant to enсourаge you contіnue уour gгeat
    pοsts, have a nice dаy!

    Αlso visіt mу ωebsite; resistoг rеsiѕtаnсе ()

    ReplyDelete

Subscribe to: Post Comments (Atom)